The MSCBLEEDCHEK is a rental pressure gage that works in conjunction with the MSCBBS(S)ASY sealed bleeder assembly to allow a simple means to check system brake pressure at the caliper. The bleeder valve of the BBS(S)ASY is replaced with the gage and valve adapter. It is then screwed down tight in the bleeder assembly and backed out 1 turn to allow flow to the gage. System pressure can then be read to verify a minimum of 450 psi to allow rated brake torque to be achieved.
This unit can only be used with the new style BBS(S)ASY assembly which have an o-ring seal on the bleeder valve. It will not work with older, unsealed bleeder assemblies. The new style bleeder assembly is linked below
There is a deposit required with a refund of all but $10 upon return of the undamaged unit to Matco Aircraft Landing Systems