Matco Aircraft Landing Systems produces a superior 6″ inch wheel and brake assembly for use with aircraft requiring less than 1420 lbs per wheel. This model uses 1.25 inch TAPER/ROLL bearings. (Check the product comparison table for other bearing and caliper configurations).
DIMENSIONS – The F600 is a 6″ inch wheel with 5.37 inch width with an additional 1.23 inch caliper spacing. Bearing spacing is 3.5 inches and axle spacing is 1.25 inches. The total weight of this wheel and brake assembly is 7.8 pounds. The bearing axle diameter is 1.25 inches. This wheel requires a tube with a 90 degree valve stem. (see below)
The WHLF600 is designed for the following standards:
|Static Capacity||1420 LBS|
|Load Limit||4260 LBS|
|Maximum Accelerate/Stop Kinetic Energy||189604 ft-lb|
|Torque Rating (@450 PSI)||1988 in-lb|