Description

Matco Aircraft Landing Systems produces a superior 6″ inch wheel and brake assembly for use with aircraft requiring less than 1185 lbs per wheel. This model uses 0.75 inch TAPER/ROLL bearings. (Check the product comparison table for other bearing and caliper configurations).

DIMENSIONS – The F602 is a 6″ inch wheel
With 5.37 inch width
With an additional 1.23 inch caliper spacing
Bearing spacing is 3.7 inches
Axle spacing is 1.25 inches
The total weight of this wheel and brake assembly is 7.8 pounds
The bearing axle diameter is 0.75 inches
This wheel requires a tube with a 90 degree valve stem. (see below)
WHL & BRK ASSY 6″ .7

PERFORMANCE

The WHLF602 is designed for the following standards: